DPA FIOF56-M Single-Ear Omnidirectional Mic with a TA-5F Connector for Lectrosonics Wireless Transmitters and Med. Boom Beige

DPA FIOF56-M Single-Ear Omnidirectional Mic with a TA-5F Connector for Lectrosonics Wireless Transmitters and Med. Boom Beige

The DPA FIOF56M Single-Ear Omnidirectional Mic with a TA-5F Connector for Lectrosonics Wireless Transmitters and Med. Boom | Beige features a 90mm boom arm that has wind and pop protection integrated into the microphone design. The boom and earhook can be rotated for use on your left or right ear and have a lightweight 0.30-ounce design for minimal visual impact. The d:fine Headset Microphone has a maximum sound pressure level (SPL) of 144dB, allowing it to be used for both speaking and singing applications. It can be used in scenarios when hands-free miking is desired, such as corporate presentations, lectures, or in houses of worship.

Key Features

• Omnidirectional Polar Pattern
• Condenser Element
• 144dB Max SPL
• 90mm Boom Length
• TA-4F Connector
• 3 x Windscreens
• Wearable on Left/Right Ear
• Minimal Visual Impact

Technical Specs

Transducer

Pre-polarized condenser

Polar Pattern

Omnidirectional

Principle of Operation

Pressure or pressure gradient

Frequency Response

20 Hz to 20 kHz

3 dB boost at 8 to 15 kHz

Maximum SPL

144 dB

Dynamic Range (Typical)

97 dB (typical)

Signal-to-Noise Ratio

68 dB A typical, A-weighted @ 1 kHz @ 1 Pa (94 dB SPL)

Power Requirements

5 to maximum 50 V through DPA adapter for wireless systems

Total Harmonic Distortion

< 1 % up to 123 dB SPL peak

< 1 % up to 120 dB SPL RMS sine

Output Impedance

30 to 40 Ω

Output Connectors

TA-5F Connector for Lectrosonics Wireless Transmitters

CMRR

> 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter

Current Consumption

1.5 mA (microphone, typical)

Sensitivity

6 mV/Pa; -44 dB @ 1 V/Pa (nominal, ± 3 dB @ 1 kHz)

Noise Level

A-weighted: 26 dB A @ 20 µPa (maximum 28 dB A, typical)

ITU-R BS.468-4: 38 dB (maximum 40 dB, typical)

Cable

Length: 4.3' (1.3 m)

Diameter: 0.06" (1.60 mm)

Boom

Length: 3.5" (90 mm)

Capsule Diameter

0.2" (5.4 mm)

EMC Compatibility

Fully compatible

Temperature Range

-40 to 113°F (-40 to 45°C)

Relative Humidity

≤ 90%

Microphone Head Size

0.37 x 0.21 x 0.11" (9.50 x 5.30 x 2.90 mm)

Weight

Microphone boom: 0.03 oz (0.8 g)

Earhook: 0.04 oz (1.1 g)

Cable: 0.23 oz (6.6 g)

Total weight: 0.3 oz (8.5 g)